Why Fishing Rods Break

Fishing Rod

There are many ways to find out how fishing rods break. This topic might be one of the most important for most anglers, but it is also very difficult to pin down. There are different opinions on exactly why fishing rods crack and what causes them all together. Because different anglers use different rods and fish in different conditions, this may be the case.

12 Reasons Why Fishing Rods Break: Exclusive Fishing Tips

There are several different reasons that fishing rods break. Before we look at the causes, you should ask yourself what quality rod you are using and why. It’s important to decide if you want to use your rod more for fun or if you expect it to be used in tough conditions. If it is just for fun, then there is no need to worry about how it breaks.

  • 1. By Bending

If you bend your rod completely in half, the break will occur at that point. This type of break is very common with cheaper models.

  • 2. By Snapping In Half

The tip of many fishing rods snaps off at the point where it is fastened into the reel seat. Because of this, a medium or larger fish strikes a rock in shallow water or comes into contact with a rock in shallow water. These types of clean breaks are common on older and poorly maintained equipment.

  • 3. By Splitting At The Belly

This type of break is caused by catch energy overloading the rod on larger fish or a medium fish. Because it is difficult to control, most anglers associate this with the fishing rods of old.

  • 4. By Cracking In Half At The Foam Handle

This type of break is most often caused by a fall on hard ground. It can also occur due to use causing knotting or poor maintenance. Rarely do expensive pieces of equipment from good manufacturers experience this issue.

  • 5. Tangling and Knotting

Fishing rods break because of tangling and knotting. Any time a fishing line, lure, or lure fishing is lifted off the water, it is bound to knot something. If you can’t untangle a line with just your hands, it is tied too tight. The same thing happens with a loose hook and a weighted bobber. The bobber will fall off the line without being lassoed by the hook that was attached to it.

  • 6. Snapping Under Tension

If you’re bending the rod back and forth too many times without letting go of it for a longer time, the rod will break. Unfortunately, this happens quite often to experienced anglers. With heavier lures, you must keep the rod in tension; fish fighting hard will require extra tension.

  • 7. Over-Bending

If you over-bend your fishing rod, it can snap or crack, too. When performed on your own, this isn’t difficult, but when it’s done by someone else, it is. Therefore, it is important to test new rods before you buy them. You can determine how they bend and whether they will crack by doing this.

  • 8. Over-Stressing

Most experienced anglers do this without knowing it, so they may not realize that it’s the reason for a broken rod. Excessive stress on a fishing rod causes it to weaken over time.

  • 9. Casting

Casual users rarely experience a broken rod due to this problem. Casting clean breaks are usually only caused by professionals out on tour or TV shows that put high-end equipment through rigorous use.

  • 10. Reel Strike/Grab Break

When you’re playing a heavy fighting fish and pull too hard, the line can snap because of its strain. A fishing reel strike is also known as a shear break. It is easy for this to happen. Most experienced anglers would never let it happen to them, but sometimes they can’t help it.

  • 11. Storing Rods Improperly

If you do not care for your fishing rod correctly, it could break while storing or transporting it. For example, it’s easy for the ferrule of the reel seat to crack if the rods are jammed together. Also, if they are not tied properly, they can rub against each other and cause the rod to snap in half.

  • 12. Rod Tip Too Long

If you’re fishing with a rod that is too long, then it can be easy for the tip to break off. You shouldn’t use a long rod if you plan to fish in shallow water with limited flexibility. When this happens, the tip will snap off and leave you with a broken rod.

Rod Failures and Design Flaws

Most rod failures are caused by normal wear and tear like every other piece of equipment subjected to extreme conditions. However, design flaws will cause rods to break, and it is important to look for these flaws to avoid the same fate. The most common reasons for rod failure are:

Rod Tip Speed:

The faster the tip of a fishing rod runs, the faster it will break. Therefore, if a rod has a speed rating greater than the fish you are fishing for, it could break.

Rod Weights:

If you are using too many weights on your fishing line, then this can be what causes your fishing rod to break. When these weights fall off the line, they can cause knotting that is impossible to untangle and lead to disaster in deeper water and stronger winds.

Rod Flexibility: 

The flexibility of a fishing rod will only be essential in tight spaces or when the rod is used in blinding winds. The problem comes when it gets too flexible and snaps in half.

Rod Design: 

It is easy to see the design flaws with any fishing rod. However, some of the more common failures are made worse by poor maintenance or inexperience. The best way to avoid this is by learning what type of rod you want to buy and reading reviews about it before you purchase one for yourself.

Rod Material:

Most rod failures are caused by normal wear and tear like every other piece of equipment subjected to extreme conditions. However, design flaws will cause rods to break, and it is important to look for these flaws to avoid the same fate.

The Life Circumstance of Fishing Rods and Rod Breakage

With so many fishing rods sitting around, there is a good chance that you or someone you know will eventually experience one or more rod problems. In most situations, rods break because they are not cared for properly, and this is an easy mistake to make with any equipment. Rod failures are possible with any fishing rod, whether you are using a freshwater or saltwater rod. However, the situation can be more critical when the rod is used in deep water or ice. Most anglers choose freshwater rods because they are less likely to break in most situations and better grip the line.

Types Of Fishing Rods

1. Collapsible Fishing Rods: Collapsible fishing rods are very popular among anglers because of their convenience and ability to be put away when not needed. The greatest thing about a collapsible fishing rod is that it takes very little space and can usually be stored within a tackle box. They are also not so expensive. Collapsible fishing rods are the ideal fishing rods for those who fish regularly. Although they are more convenient, they can break if you mishandle them or if you try to store them incorrectly. A collapsible fishing rod is made of fiberglass and has a lot of giving in it when you start reeling in your catch.

2. Spinning Fishing Rods: Spinning fishing rods have been around for many years now and are considered one of the most basic fishing rods. Spinning rods are a good option if you need something very lightweight to use when you are out on the water. Spinning fishing rods are much easier to carry around than other fishing rods, but they still have some strength in them. 

3. Single-Pole Fishing Rods: Single-pole fishing rods are commonly used by beginners or fish regularly. If you do not want to spend a lot of money on a fishing rod, then single-poles are the best option for you. They are inexpensive and do not take up much space. However, they cannot handle heavy loads very well and are for situations when you need to reel in your catch slowly.

4. Graphite Rod Blanks: These fishing rods are very popular among amateur and professional anglers who want to enjoy the sport of fishing. They are lightweight, strong, and durable. The only disadvantage of graphite rods is that they are more expensive than the other types of rods. However, if you bring a graphite rod with you to your favorite fishing spot, then it should last for years without breaking.

5. Aluminum Rods: Some people prefer using aluminum fishing rods because of their durability and lightweight nature. However, aluminum rods are considered more vulnerable than other types of rods due to their material. Therefore, if you are a beginner who wants to enjoy fishing without spending too much money, it is better to buy a cheaper rod to avoid purchasing this rod again in the future.

6. Medium Power Rod: These fishing rods are best for beginners or those who are not very experienced. They are also good for people who want to fish occasionally. The main advantage of this rod is that it is cheap and lightweight. If you need a fishing rod on your boat, it will be perfect for you since it does not weigh much.

What Is A Fishing Pole

A fishing pole is an item that is used in conjunction with a fishing rod to catch fish. There is a major difference between these two items: a fishing rod will have several holes on it, while a fishing pole will only have one hole at the tip. However, fishing poles differ slightly from each other in terms of design and functionality. Although there are many kinds of fishing poles, the most common ones are telescopic, folding, and sliding. Telescopic poles are usually made of aluminum or fiberglass and are very economical.

Which Is Better For Beginners: Fishing Pole Or Fishing Rod

While deciding on what to use for fishing can be a challenge, it is important to remember that beginners are better off fishing poles than fishing rods. Even if you know how to use a fishing rod, it would be better for you to start with a fishing pole to not spend too much money on something that you may not like.

What Are The Benefits Of 2 Piece Rods

Double-ended or double-handed rods are a lot more preferable than single-handed rods. Even if the individual rods are not better, each rod together can create more catches. You will need to make a little bit of a time difference (maybe 15 to 30 seconds) when you catch the fish, but this can be compensated by the overall catch and catch frequency.

1. 2nd rod can act as a safety net for when the rod damage

A good example of this is if you have a double-ended fishing rod and your hands get tired. A second pole could be useful here. You can use it to hold the fish and prevent it from slipping away while using your other hand to re-hook it back to the rods.

2. Use a second rod to ensure you catch them (if they are small).

If you are fishing for a large fish, the chances of the fish getting away decreases. Fishing rods with two ends can help ensure you catch them. You can do this by positioning the spinning reel to keep the fish from slipping away while using your other hand to re-hook it back in.

3. The Second Pole Can Be Used To Catch The Fish That Are Fighting On The Main Reel

Sometimes you will get a fish that will wiggle and fight with all its might. It would be best if you didn’t let it get away as this will put your reels at risk of getting damaged. Instead, you can easily catch the fish using your second pole and then reel it in safely. This way, you can be sure of catching whatever is on your mainline without worrying about any damage done to it.


Fishing rod damage is common and does occur at any given time, and there’s no way to prevent it unless you have an eye on it. Before you embark on a fishing trip, make sure you’ve inspected your rod and chosen the best rod and reel. When fishing is over, make sure you’ve washed your rod and reel thoroughly. You can also invest in a fishing rod inspection kit that will help you maintain your rod and knife so that you will have a long-lasting experience.